Skip to content
Phuket Dyno by Phuket Garage

Tool · European bikes and the rest

Alientech KESS3 motorcycle tuning in Phuket

KESS3 is the professional ECU programmer we use where a motorcycle-only tool cannot get in: BMW, Ducati, Triumph, KTM, Husqvarna, Aprilia, and the Japanese ECUs nothing else reads.

What KESS3 does

It is made by Alientech in Italy and does one job: read the complete calibration out of an engine control unit and write a modified one back, reliably, with checksums corrected. Its bike protocols are updated continuously as new models and ECUs appear.

KESS3 is the way in. The map itself is still written here, for your bike, against dyno measurements. We do not load generic files.

Three ways to connect

Which one your bike needs depends on its ECU, and it decides how long the job takes.

OBD
Through the diagnostic plug. Nothing is removed from the bike. The quickest route, available where the manufacturer has not locked the plug.
Bench
The ECU comes off the bike and is connected by its own plug on the workbench. It is not opened. This is how many recent European ECUs are done.
Boot
For the few units that allow nothing else: the ECU is opened and its memory is accessed directly. More time, and we will always tell you first.

Which bikes

Alientech lists protocols per ECU, not per brand, so the same model can change from one year to the next. Send us make, model and year and we look it up before you ride over.

For Honda, Yamaha, Kawasaki and Suzuki we usually reach for Woolich Racing first and keep KESS3 for the ECUs it does not cover.

If the ECU has to come off

Bench work adds workshop time for removing and refitting the unit, and on some bikes that means bodywork and the tank. The bike stays with us for the day, sometimes into a second one. You know which case yours is before you book.

KESS3 tuning questions

Is the remap reversible?

Yes. Before changing anything we read your original ECU file and keep it. It can be written back at any time — before a sale or a dealer visit.

Which bikes can you tune?

Most fuel-injected big bikes from Honda, Yamaha, Kawasaki, Suzuki, BMW, Ducati, Triumph, KTM and Husqvarna. Support depends on the exact model, year and ECU, so send us those three things and we confirm before you book.

How long does it take?

A power run takes about an hour. A custom remap takes from half a day to a full day, longer if the ECU has to come off the bike for bench work or if the engine is heavily modified.

Will a remap affect my warranty?

It can. A manufacturer may refuse a warranty claim on an engine whose ECU has been modified. We keep your original file so the bike can be returned to stock, but you should decide with that in mind.

Booking

Send us the bike, the year and what is fitted.

We check that your ECU is supported, tell you which tool it needs and what it costs, then give you a slot.

WhatsApp +66 80 681 6753 LINE @phuketgarage

Daily 08:00–20:00, by appointment

Book a dyno slot